How Does Brake Dust Damage Your Alloy Wheels?
Posted on Mon 26th Nov 2018 at 12:43
Brake dust happens when abrasion between the brake discs and pads occurs. This is a normal result of driving, but if the brake dust is left on your alloy for a period of time it will start to corrode the metal. This is not a minor issue and should therefore not be left unattended.
To stop brake dust causing damage to your alloy wheels we recommend you wash your rims regularly. If brake dust persists then we suggest you use a wheel cleaner which are designed to work on specific metals and alloys. Use an alloy or a nylon brush and work the solution well into the brake dust; once lifted it should be cleaned away with lots of water.
If you see that your alloy wheel has already started to corrode, then it is time to book it into a wheel repair specialist for repair. Even if the corrosion is very bad Diamond Alloys London can still remove it with acid and give the alloy a fresh poweder coat, re-spray and protective lacquer refurbishment which will have your alloys looking as good as new.
At Diamond Alloys we also highly recommend rims bands. This clever accessory for your rims will help protect your alloy wheels from kerbing damage which can puncture the protective lacquer layer and allow water to seep underneath. These can be fitted at the end of your refurbishment for a small cost which alongside a refurbishment is a lot cheaper than buying new, especially if you take advantage of the Diamond Alloys 4 wheel discount.
Call us today on 0208 845 7788 and book your corroded alloy wheels in for an alloy wheel refurbishment.